Call us now : 0141 423 9990

Rust-Oleum Painter's Touch Aerosol Spray Paint - Winter Grey Gloss

Stock Status:   In Stock
Product Brand:   Rust-Oleum
Product Condition:   New
£6.99
Send to a friend

Rust-Oleum Painter's Touch Aerosol Spray Paint - Winter Grey Gloss

Rust-Oleum Painters Touch Spray Paint multi-purpose - Available in Gloss / Satin / Matt

Size: 400ml

Painters Touch is a range of multi-purpose decorative and protective aerosol spray paints ideal for everyday projects. Typical applications include painting of furniture, cabinets, doors, frames, vases, baskets, trim and general bric-a-brac. Premium quality multi- purpose paint for use on virtually any surface.

Features

  • 400ml pack size.
  • Available in 42 attractive colours.
  • Range of gloss, satin and matt finishes.
  • High quality, fast-drying formulation.
  • Indoor and outdoor use.
  • Smooth, durable finish.

Preparation: Ensure surfaces to be painted are free from any loose paint, rust, wax, oil and grease. Previously painted surfaces should be abraded to provide a key. Bare wood and metal should be primed with Rustoleum surface primer. Bare plastic should be primed with Rust-oleum plastic primer. Cap and/or label indicate approximate colour and finish. Cover surrounding areas to protect spray mist.

Application: Shake can vigorously for 1 minute after mixing ball begins to rattle, continue to shake regularly during use. Hold can 30cm from surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results whilst spraying keep the can the same distance from the surface and keep the can in motion. Apply several light coats a few minutes apart. 

Cleaning: Wipe wet paint from tip before storing, if the valve clogs during use, remove and rinse with white spirit.

Drying and recoating: Touch dry in 20 minutes. Hard dry in 24 hours. Recoat within 1 hour or after 24 hours.

Coverage: The can covers approximately 2m² per coat dependant upon surface profile/porosity.

Limitations: Do not use on galvanised steel or surfaces that regularly exceed temperatures over 90 degrees. Apply only when temperature is between 10- 32 degrees and relative humidity below 85%.